Single Phase Relay 1000 VA | Capasee

Single Phase Relay 1000 VA: Reliable Voltage Protection for Homes and Offices in Pakistan

A single phase Relay 1000 VA is a protective device that is capable of switching off the power supply to your appliances whenever it senses voltage levels outside the safe range. It has been designed for use in houses, small offices, or clinics in Pakistan, which experience frequent voltage fluctuations and unstable supply from the grid, to safeguard the motors, refrigerators, and other single phase equipment against sudden damage with a single phase Relay 1000 VA.

Key Features and Benefits

• 1000 VA capacity: It can provide power to the common household and small office appliances like a fridge, water pump, and split AC without tripping under normal operating conditions with a single phase Relay 1000 VA.
• Adjustable voltage thresholds: Allow setting of a different high and low cut off voltage, which means that the single phase Relay 1000 VA will respond to the voltage pattern in your area rather than a factory setting that may not be appropriate.
• Time delay restart: Waits a few minutes and restarts power when the voltage is steady. One of the most common appliance failures that occurs during voltage recovery after load shedding is when the compressor burns out; this single phase Relay 1000 VA feature prevents this.
• LED status indicators: You will be able to tell at a glance when the single phase Relay 1000 VA unit is on standby or running, or if it has tripped due to a fault without having to use a multimeter to find out what has happened.
• Compact panel mount design: Easy installation for electricians by fitting into standard distribution panels without rewiring the entire panel. 
• Overload and short circuit protection: Shuts off the circuit before the wiring insulation becomes hot, minimizing the risk of fire in buildings with old wiring, which is found in many homes in Pakistan and small size commercial units. 

These are all practical, common issues that are resolved. Pakistan’s electrical power supply is often rated beyond 260V or below 160V during peak demand hours, and a single phase Relay 1000 VA  with fixed voltage limits can’t work properly on either extreme.

Who Should Use This Relay

It is a single phase Relay 1000 VA,  designed for use in homes that have one primary appliance circuit, like a refrigerator or water heater motor, and experience voltage instability. The same protection is offered to small office environments using printers, computers, and lighting circuits. Single phase lab equipment or refrigeration for medicines is used in clinics and small diagnostic labs, and just a few seconds of a voltage spike can ruin sensitive electronics. It is a practical solution for any citizen in a city or town that is experiencing seasonal load shedding, transformer overload, or unreliable WAPDA supply with a single phase Relay 1000 VA.

Why Choose Capasee Electro Medical Engineering

Capasee Electro Medical Engineering has had hands on experience with the electrical systems and medical equipment protection systems, thus acquiring an insight into how voltage instability harms appliances, not just what the specifications say they do. All single phase Relay 1000 VA  units are tested before dispatch, and the company offers after sales support for installation instructions and troubleshooting. When a protection device requires servicing, customers receive a simple warranty and a direct point of contact, instead of having to go through a call centre.

Frequently Asked Questions

How many volts does a relay require to turn on?

The most common types of single phase relays are designed to switch power within the normal 220V to 240V AC power supply range, and usually the control circuit is not powered from an external source but is connected to the power supply as well.

What is the function of phase relay?

A phase relay keeps track of the incoming voltage and automatically trips the load out of the circuit when it exceeds or drops below a safe level and then re engages the load when the voltage is back to normal, preventing damage to the equipment connected to the load.

What is the earth fault relay for single phase power system?

An earth fault relay is used in addition to voltage protection to detect current flowing through the insulation to the earth and trip the circuit before it can cause electric shock or fire as a result of a fault or insulation failure.

What is a single phase preventer relay?

A voltage protection relay that is installed on a single phase supply line and is used to prevent damage to the equipment caused by over voltage, under voltage, and sudden voltage changes on single phase lines is called a single phase preventer relay.

What are two types of relays?

Relays can be generally categorized into electromechanical relays with physical coils and contacts and solid state relays, which operate electronically and have no moving parts, resulting in faster and quieter relay operation.

Get Your Single Phase Relay 1000 VA Today

Don’t let unpredictable voltage swings from Pakistan ruin your appliances before another spike does. Call Capasee Electro Medical Engineering to request a price, installation instructions, or bulk orders for a single phase Relay 1000 VA.