Stabilizer SVC 50 kVA | Capasee

Stabilizer SVC 50 kVA – Reliable Voltage Stabilizer for Pakistan

The stabilizer SVC 50 kVA is a voltage stabilizer that utilizes a servo control mechanism to safeguard medium sized electrical loads against the unstable voltage supply in Pakistan. Ideal for clinics, small hospitals, offices, and light industrial applications requiring constant power with no impact on sensitive equipment.

Key Features & Benefits of the SVC 50 kVA Stabilizer

• Wide input voltage range (typically 160V to 280V or so; check with the datasheet): In Pakistan, the electricity grid fluctuates greatly during peak summer load and when the grid is recovering from load shedding. A broad range refers to the ability of the stabilizer SVC 50 kVA to continue functioning even when the voltage drops too low or rises too high.
• Servo motor correction technology: This type of stabilizer SVC 50 kVA, corrects voltage by moving the voltage itself, unlike static voltage stabilizers, and provides a smoother and more precise voltage correction mechanism using a motor. It is important for devices such as diagnostic machines or office servers that are susceptible to minor changes in their environment.
• 50 kVA capacity: The stabilizer SVC 50 kVA configuration is used for moderate load combinations, such as a small clinic that is using diagnostic equipment, lighting, and air conditioning at the same time, or an office floor with several workstations and air conditioning units.
• High correction speed: If the voltage fluctuates rapidly, it is caused by the connected appliances being stressed, and this occurs when there is a sudden change in the voltage. This sudden change happens immediately after a load shedding event, when the voltage returns to normal through the stabilizer SVC 50 kVA.
• Built in overload and short circuit protection: This provides protection for the stabilizer SVC 50 kVA and any equipment connected to it, saving on parts cost and equipment downtime during repairs.
• Air cooled or oil cooled design (specify which applies): The cooling method has an impact on the performance in the high summer temperatures in Pakistan. especially in big cities like Lahore, Karachi, and Multan, where there is a lot of heat in the environment, and that can shorten the life of the stabilizer SVC 50 kVA.

All of these address a specific local problem and are more than just a spec in a list. The difference between a stabilizer SVC 50 kVA, that will last in the Pakistani environment and one that will fall apart within a year.

Who Should Buy the 50 kVA Stabilizer in Pakistan?

This unit won’t fit into all buildings, only a specific load range. The stabilizer SVC 50 kVA works well for:

• Small to mid sized clinics and diagnostic centres that operate on equipment that can be affected by voltage swings could end up costing them a lot of money to repair or diagnose if a bad surge happens with no stabilizer SVC 50 kVA installed.
• For cities that experience frequent voltage instability, offices that have combined computer, lighting, and AC loads are particularly vulnerable, especially in the summer when demand on the grid is high, making the stabilizer SVC 50 kVA an ideal solution
• Light commercial applications like small manufacturing facilities, printing presses, or workshops that operate motors and machinery that require consistent input voltage to prevent damage with the stabilizer SVC 50 kVA.
• Buildings that experience frequent load shedding cycles, where the electricity supply surges back when it does come back, are at risk of equipment damage if there is no stabilizer SVC 50 kVA, between the power supply and the connected equipment.

If you have a combined load that is much larger or smaller than 50 kVA, it will be more suitable to use a different size. The correct size is more important than purchasing the largest unit possible, even when considering a stabilizer SVC 50 kVA.

Why Choose Capasee Electro Medical Engineering

Capasee Electro Medical Engineering equipment recommended here is not simply copied from a catalogue but has been used in hospitals and clinics and by commercial buyers in Pakistan. There are differences in power conditions from city to city, and personal experience with real installation environments influences what’s sold and the subsequent support provided for the stabilizer SVC 50 kVA.

After sales support is handled directly, installation guidance, troubleshooting and warranty service remain accountable to one team. If that stabilizer SVC 50 kVA specification isn’t as important as the direct support after the sale for equipment that guards expensive machinery, I don’t know what is.

Frequently Asked Questions

What is the price of a 50 kVA stabilizer?

The price of a 50 kVA stabilizer may vary according to the brand, cooling (air or oil) and copper and steel rates, which directly influence manufacturing prices in Pakistan. For a new quote based on your needs, please contact Capasee Electro Medical Engineering directly.

What is the load capacity of a 50 kVA transformer?

The capacity of a 50 kVA transformer or stabilizer is generally 40,000 W to 45,000 W of real power, depending on the power factor of the connected equipment and the continuous and intermittent nature of the load.

What is the kVA rating of a stabilizer?

kVA is a term used to define the electrical load that a stabilizer can safely accommodate. It is based on the total power consumption of all the equipment which will be connected through it, and selecting the appropriate rating will involve what you will use, plus a bit of extra power for future expansion.

What is the price of a 55 kVA servo stabilizer?

The price of a 55 kVA servo stabilizer is slightly higher than that of a 50 kVA stabilizer as the components are bigger and the capacity is higher. The price will vary depending on the manufacturer and the type of cooling, so contact the company for an exact quote on the prevailing rates.

What is the price of a 40 kVA stabilizer?

A 40 KVA stabilizer is going to be more affordable than a 50 KVA stabilizer as the 50 KVA is going to need larger internal components, and it is going to be a larger stabilizer, which makes it more expensive. Raw material costs influence prices, and obtaining a recent quote is the best way of determining actual pricing.

Get Your 50 kVA Stabilizer Quote Today

When voltage fluctuations pose a risk to your equipment, it is best to get them resolved in advance rather than after a problem has occurred. Contact Capasee Electro Medical Engineering for a quotation for the stabilizer SVC 50 kVA and for information as to whether or not it is appropriate for your actual load requirement.